UHF TV Antenna 001

Autor:

Tennen-Gas

Přisuzování:

Obrázek je označen jako „Vyžadováno uvedení zdroje“ (Attribution Required), ale nebyly uvedeny žádné informace o přiřazení. Při použití šablony MediaWiki pro licence CC-BY byl pravděpodobně parametr atribuce vynechán. Autoři zde mohou najít příklad pro správné použití šablon.

Shortlink:

https://czwiki.cz/b/bc247

Zdroj:

Wikimedia Commons

Formát:

1000 x 400 Pixel (167878 Bytes)

Popis:

Yagi antenna for UHF HDTV reception. The antenna's main lobe is off the right end of the antenna; it is most sensitive to stations in that direction. Each of the metal crossbars along the antenna support boom is called an element, which acts as a half-wave dipole resonator for the radio waves. The antenna has one driven element which is attached to the TV; it is behind the black box (left). The black box is a preamplifier which increases the power of the TV signal before it is sent to the TV set. The 17 elements to the right of the driven element are called directors; they reinforce the signal. The 4 elements on the V shaped boom (left) are called a "corner reflector"; they serve to reflect the signal back toward the driven element. Yagi HDTV antennas use a corner reflector to increase the bandwidth of the antenna. The rest of the antenna increases the gain at higher channels, while the corner reflector increases the gain at lower channels.

Komentář k Licence:

GFDL

Licence:

CC-BY-SA-3.0

Credit:

Vlastní dílo

Sdílet obrázek: